​Characteristics Of Angular Contact Ball Bearings

What is angular contact ball bearing
Angular contact ball bearing is a kind of bearing which can bear radial and axial loads at the same time.This kind of bearing has a contact Angle. The larger the contact Angle is, the higher the axial bearing capacity will be, but the radial load will be reduced accordingly.
Installation skills of angular contact ball bearings
High speed precision angular contact ball bearings are mainly used in high speed rotating occasions with light load.The installation forms of angular contact ball bearings are back-to-back, face to face and series arrangement.Back-to-back that is, when the wide end faces of two bearings are installed relative to each other, the contact Angle line of the bearing diffuses along the direction of the rotation axis, which can increase the rigidity of the radial and axial supporting angles and maximize the anti-deformation ability.Face to face, that is, when the narrow end faces of two bearings are installed relative to each other, the contact Angle line of the bearing converges in the direction of the axis of rotation, and the rigidity of the supporting Angle is

small.Series arrangement means that when the wide end faces of the two bearings are installed in one

direction, the contact Angle lines of the bearings are in the same direction and parallel, so that the two bearings can share the working load in the same direction.However, when using this type of installation, in order to ensure the axial stability of the installation, two pairs of bearings arranged in series must be installed opposite each other at both ends of the shaft.

Characteristics of angular contact ball bearings
1.General assembly bearings
General purpose assembly bearings are specially engineered so that when the bearings are mounted close to each other, any combination can achieve a given internal clearance or preload, as well as an average load distribution, without the use of gaskets or similar devices.Pair bearings are used when the load carrying capacity of a single bearing is insufficient, using cross-link configuration mode, or when a combined load or axial load acting in two directions, using back-to-back or face to face configuration mode.
2.The basic design of bearings for the configuration of a single bearing
The basic design of single-row angular contact ball bearings is mainly used in configurations with only one bearing in each position.The width and protrusion are normal tolerances.Therefore, it is not suitable to install two single row angular contact ball bearings close together.
The price of angular contact ball bearings
The price of angular contact ball bearings is affected by many factors such as market, material and quotation. If you want to know the specific price of angular contact ball bearings，please contact us to make enquiries.
Supplier of angular contact ball bearings:BMB Bearings
BMB Bearings is the complete one-stop supplier of OEMs and wholesalers purchasing high-precision, miniature ball bearings, industrial ball bearing related products, as well as related professional services, including world-class engineering and design. If you have any need, please feel free to contact us .